Dr32 User Manual Download For Mac
Dr32 User Manual Download For Windows
Dr32 User Manual Download 3600 Printer
Dr32 User Manual Download Free
Free User Manual Download
Dr32 User Manual Download Pdf

Contents

2 Known problems
7 Firmware

The Blueskysea B1W camera, released at the end of 2017, is a small, discreet Wifi camera at a very competitive price point. This camera uses the Novatek GM8135S processor (Novatek purchased Grain Media in 2017) and Sony IMX323 CMOS sensor. While the IMX323 is found in many cams, this is the first time we have seen the GM8135S in a dash cam. The GM8135S processor has typically been used in surveillance cameras.

The B1W can record at 1080p resolution at 30fps with a bit rate of 12Mbps. Video quality during the day is very good and night quality is good. The Sony IMX323 sensor works well at night but some owners indicate the videos have a bluish color to them. At 12Mbps, bit rate is not super high but the camera does a good job capturing details.

Triangle is intended to alert the user to the presence of un-isolated, dangerous voltage within the inside of your TV that may be of sucient magnitude to constitute a risk of electric shock to persons. Do not overload power strips and extension cords.

The B1W is a small camera measuring 87mm x 43mm x 35mm and the “pill shaped” form factor is quite discreet. The camera is all black and uses an adhesive mount. The B1W does not come with a screen or GPS. It does come with Wifi, G-sensor and it uses a super capacitor instead of a battery (capacitor is better for hot environments). Build quality is quite good.

Since the B1W does not have a screen, all settings are adjusted via the smartphone app. The camera does have one button on the end. A short press of the button locks the current file being recorded. A long press of the button switches off the Wifi (default is Wifi on, but you can download firmware for default Wifi off). There are voice notifications in English for SD card detected, recording, Wifi on / off, shutting down, etc. You can replace some of the voice notifications with beeps or turn them off completely. See the “Sound Notification” section on this page for more details.. The camera also has a small led light to provide notifications as per below.

View and Download LSIS XEC-DR32H user manual online. Programmable Logic Controller, XGB Hardware, XGT Series. XEC-DR32H Controller pdf manual download. Also for: Xec-dn64h, Xec-dp64h, Xec-dr32h/d1, Xec-dn32h, Xec-dr64h/d1, Xec-dp32h, Xec-dr64h. What the icons and signs in this user manual mean: WARNING Hazards or unsafe practices that may result in severe personal injury or death. CAUTION Hazards or unsafe practices that may result in minor personal injury or property damage. CAUTION To reduce the risk of fire, explosion, electric shock, or personal injury when using.

There are a few other things to be aware of on the B1W. While the original firmware did not allow for the video to be flipped, the current firmware has added this feature. The time stamp is in white lettering on the top left corner which is hard to read on a bright sky. Also the USB cable for power is right beside the MicroSD slot making it very difficult to remove the card without unplugging the power cable.

We would like to thank our members Paul Iddon, TonyM, SawMaster and dash riposki who created reviews on our forum for the B1W.

Sound Notification

If you do not like the voice notifications, you can replace most of them with beeps. Note that the voice prompts ‘SD Card Detected’ and ‘Recording Start’ are not replaced. To replace the voice notifications, download this sound.bin file. Copy this file to the SD card. When the camera starts, the voice notifications will be replaced with beeps.

You can also turn off all sounds, by toggling the “Equipment Beep” slider in the smart phone app.

Known problems

Poor Audio

The biggest negative raised by owners from the first few batches is the poor audio quality that has a lot of background noise. The manufacturer has corrected this problem in later batches by replacing the microphone.

Mounting the camera

TonyM provided the following photos of the camera mounted. The Mobius is on the left and B1W on the right.

Sample Videos

Day Video

Night Video

Comparison – Mini 0906 top, Gitup F1 middle, Blueskysea B1W bottom

Should I Purchase?

Dr32 User Manual Download For Mac

If you are looking for an affordable, discreet, Wifi enabled camera with good video quality, the Blueskysea B1W is a great choice. Since the camera does not have a screen you will need a smartphone to setup the camera using the available app.

Overall one of the best bang for your buck cameras. Better video quality than the previous budget camera, the A118C.

To see what other owners are saying, visit our Blueskysea Forum.

Where to purchase for lowest price

This camera primarily sells for approximately $50 from a number of vendors:

Amazon.com, Amazon.co.uk, Amazon.ca
eBay.com, eBay.co.uk, eBay.ca and eBay.com.au

Firmware

WARNING! MAKING CHANGES TO YOUR FIRMWARE ARE PERFORMED AT YOUR OWN RISK. WE ARE NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DASH CAM AS A RESULT OF THESE INSTRUCTIONS.

Firmware Update Instructions

Download the firmware and unzip it. You will find 2 files: file names cardvr_img.bin and default_cfg.bin
Format the SD card in FAT32 format
Copy the file cardvr_img.bin and default_cfg.bin files over to the root directory of the SD card and put the card into the camera.
Power on the camera in the car and the firmware should automatically move onto the camera, leave for 30 seconds to 1 minute to ensure the firmware has updated the camera
Take out the SD card and reformat it
Place the SD card back into the camera
Check the firmware version using the app on your smartphone
If you installed the Default WiFi On firmware, the GREEN LED light should be flashing. If you installed the Default WiFi Off firmware. You can switch between WiFi on and off by pressing and holding the button at the end of the camera for 2-3 seconds.

Latest Firmware

The latest firmware can be downloaded from the Blueskysea website or below:

Dr32 User Manual Download For Windows

Previous Firmware Versions

Reset Wifi Password Firmware

Some users have changed the default WiFi password and have forgotten it. If this happens you can reset the WiFi password to the default: 1234567890

Download the firmware and unzip it. You will find default_cfg.bin
Format the SD card in FAT32 format on a windows computer
Copy the default_cfg.bin files over to the root directory of the SD card and put the card into the camera.
Power on the camera in the car and the firmware should automatically move onto the camera, leave for 30 seconds to 1 minute to ensure the firmware has updated the camera

User Manual

The English user manual can be downloaded here.

Dr32 User Manual Download 3600 Printer

Specifications

Blueskysea B1W
Price	$50
Read Review
Manufacturer	Blueskysea
Country	China
Specifications
Processor	Novatek GM8135S
CMOS	Sony IMX323
Channels	1
Screen
GPS
G-Sensor
Wi-Fi
Parking Mode
Lock Files	Auto or Button
Video
Max Resolution	1080p @ 30 fps
M